In cartography and geographic analyses related to volcanoes, especially in Hawaii, there is perhaps nothing more important than having an accurate digital model of topography. Such models depict the three-dimensional nature of the land, elucidating features from past eruptions and influencing potential pathways of future activity.
But how are these models created?
Modeling topography on active volcanoes is unlike in any other setting because dramatic changes can occur on timescales far shorter than a human lifetime. For example, in 2018 at Kilauea, approximately 1 cubic kilometer of rock volume (0.25 cubic miles) was lost at the volcano’s summit and deposited on the lower East Rift Zone.
So, topographic models can become outdated relatively quickly, and we need to update them accordingly.
Because of the vastness of the areas to be modeled, measuring elevations on the ground using GPS is not feasible, except as a verification of other measurement techniques. Therefore, remote sensing — the measurement of ground features from the air — is preferred.
For many decades, aerial photography was the preferred remote sensing technique the U.S. Geological Survey employed in modeling topography. Overlapping aerial photos taken from slightly different positions along a flight line can be viewed to make the observer think they are seeing a three-dimensional scene rather than a couple two-dimensional images, similar to how the two human eyes sense depth. Using a large and complicated instrument called a stereoplotter, a user could draw outlines of lava flows and lines of equal elevation, or contour lines, on such a projected scene.
Aerial photography began to fall out of favor near the end of the 20th century as new technologies emerged. As such, the last aerial photography surveys to cover the entire Island of Hawaii were completed in the early 1980s. Years later, the data were compiled into a digital elevation model of the island at 10-meter (yard) resolution, which is still being used today.
However, Kilauea does not always cooperate with geographers’ desire to maintain current topographic data.
When the Pu‘u ‘O‘o eruption started Jan. 3, 1983, it marked the onset of 35 years of near-continuous topographic changes at Kilauea that reached a climax in 2018. Some reasonably successful remote sensing occurred during this time, most notably a National Oceanic and Atmospheric Administration survey in 2005, but with an ongoing eruption it is inevitable that some of the data will be instantly rendered obsolete.
In the months that followed the 2018 eruption, it became clear that the pause in eruptive activity might be an opportunity to finally update the topography for Kilauea. Accordingly, a LiDAR survey was planned and completed in July 2019.
LiDAR stands for “light detection and ranging” — a laser pulsing instrument was flown over the landscape on a helicopter, with a sensor measuring the return times for each light pulse depending on the distance from instrument to target.
The raw data set that results from a LiDAR survey is a “point cloud.” All objects that reflected a light wave are depicted, including vegetation, structures and the ground. The “first returns” in forested areas often depict the tree canopy, and sometimes these data are useful to environmental scientists, but geologists are most interested in the last or “bare earth” returns.
To make a useful DEM from the point cloud, a filter is applied to exclude all but the bare earth points, then elevation values are calculated from the points for each cell in a grid — most often by averaging. The DEM from the 2019 Kilauea LiDAR (https://doi.org/10.5066/P9F1ZU8O) has 1-meter (3.28-foot) grid cells with calculated elevations that should be accurate to approximately 10 centimeters (4 inches). The data were verified by comparing with GPS ground control points surveyed in spring 2019.
With a reliable topographic model for Kilauea now available, the USGS Hawaiian Volcano Observatory can merge this data with existing models that still reliably depict other areas to make a new three-dimensional model for all of the Island of Hawaii. The dataset is being used by Hawaii Volcanoes National Park and the County of Hawaii; it will be incorporated into various maps, and enable more accurate projections of lava flow directions from future eruptions.
This data set will be up to date until the moment lava starts erupting again, then the whole process will likely repeat itself. Hawaiian volcanoes have a way of keeping geologists and geographers on their toes!
Volcano
activity updates
Kilauea Volcano is not erupting. Its USGS Volcano Alert level remains at Normal (https://www.usgs.gov/natural-hazards/volcano-hazards/about-alert-levels). Kilauea updates are issued monthly.
Kilauea monitoring data for the past month show variable but typical rates of seismicity and ground deformation, low rates of sulfur dioxide emissions and only minor geologic changes since the end of eruptive activity in September 2018. The water lake at the bottom of Halema‘uma‘u continues to slowly expand and deepen. For the most current information about the lake, visit www.usgs.gov/volcanoes/kilauea/k-lauea-summit-water-resources.
Mauna Loa is not erupting and remains at Volcano Alert Level Advisory. This alert level does not mean an eruption is imminent or progression to eruption from current level of unrest is certain. Mauna Loa updates are issued weekly.
This past week, about 31 small-magnitude earthquakes were recorded beneath the upper-elevations of Mauna Loa; most occurred at shallow depths of less than 8 kilometers (about 5 miles). GPS measurements show long-term slowly increasing summit inflation, consistent with magma supply to the volcano’s shallow storage system.
Gas concentrations and fumarole temperatures as measured at Sulphur Cone and the summit remain stable. Webcams show no changes to the landscape.
For more information about current monitoring of Mauna Loa Volcano, visit www.usgs.gov/volcanoes/mauna-loa/monitoring.
There were five events with three or more felt reports in the Hawaiian Islands during the past week: a M3.0 earthquake 22 km (13 mi) ENE of Honaunau-Napo‘opo‘o at 2 km (1 mi) depth at 8:21 a.m. Nov. 18, a M3.0 earthquake 9 km (5 mi) ENE of Pahala at 31 km (19 mi) depth at 3:31 a.m. Nov. 16, a M2.9 earthquake 12 km (7 mi) SSE of Fern Forest at 7 km (4 mi) depth at 9:18 p.m. Nov. 15, a M3.0 earthquake 11 km (6 mi) SSE of Fern Forest at 7 km (4 mi) depth at 3:21 p.m. Nov. 15, and a M3.8 earthquake 12 km (7 mi) ESE of Waimea at 6 km (3 mi) depth at 9:36 a.m. Nov. 13.
HVO continues to closely monitor Kilauea and Mauna Loa for any signs of increased activity.
Visit HVO’s website for past Volcano Watch articles, Kilauea and Mauna Loa updates, volcano photos, maps, recent earthquake info, and more. Email questions to askHVO@usgs.gov.
Volcano Watch is a weekly article and activity update written by U.S. Geological Survey Hawaiian Volcano Observatory scientists and affiliates.
